C300 Faceplate Indicators/Displays - Honeywell Experion C300 User Manual

C300 faceplate indicators/displays

C300 Controller states in application mode
BKUP
See Communication and system time startup fault scenarios
startup conditions in the controller due to communication and system time faults.
Corrective actions are provided to clear these conditions.
C300 faceplate indicators/displays
The faceplate of the C300 Controller contains four LEDs and a four-character
alphanumeric display as shown in Figure 7. The labels on the LEDs are: Power, Status,
FTE A and B.
The Status LED uses a 3-color scheme of red, green and orange. Generally, green
indicates OK, red indicates power up tests, a fault or failure, and orange indicates backup
mode. Blinking LEDs indicate a soft or hard failure and help to point to a problem. Soft
failures also are indicated in other displays throughout the system. The four-character
display provides additional controller status information, see Faceplate display
information. Directly below the display are two LEDs that indicate FTE activity.
162
And...
The controller is configured to do a 'Warm Start' (RRRCEESTATE
parameter).
The C300 Controller/CEE moves to the CEERUN state
The C300 Controller is configured as redundant and has assumed
the secondary redundancy role.
The C300 Controller/CEE moves to the BACKUP state.
Experion C300 Controller User's Guide
Honeywell
for details on abnormal
R301.1
11/06