Honeywell Experion C300 User Manual page 60

Configure CEEC300 block
To configure a CEEC300 function block
Step
6
Accept the default or click
arrow button and select desired user.
Press <Tab>.
7
Accept the default or click
arrow button and select desired user.
Press <Tab>.
8
Add a check to the box if you want to
enable access. Press <Tab>.
9
Add a check to the box if you want to
enable access. Press <Tab>.
10
Accept the default (Alarming Enabled), or
uncheck the box to disable alarming
function. Press <Tab>.
11
Accept the default (Memory Limit
Exceeded Alarm enabled), or uncheck
the box to disable alarming function.
Press <Tab>.
12
Accept the default or click
arrow button and select desired state.
13
If the Warm Timeout field is active,
accept the default or key in desired
timeout value. Press <Tab>.
Accept the default or click
arrow button and select desired state.
Press <Tab>.
15
Enter the appropriate value for the time
zone of the controller location. Press
<Tab>.
16
Add a check to the box if Daylight
Savings Time is in effect for this location.
Press <Tab>.
44
Action
down-
down-
down-
down-
Experion C300 Controller User's Guide
Honeywell
Result
Moves cursor to User Lock for CEE Idle
field.
Moves cursor to Program Access may
command CEE from Idle to Run check
box.
Moves cursor to Program Access may
command CEE from Run to Idle check
box.
Moves cursor to the Alarming Enabled
check box.
Moves cursor to the Enable Memory
Limit Exceeded Alarm check box.
Moves cursor to the Powerup Restart
Settings for CEE State.
Note that if you select LASTTIMEOUT
state, then the Warm Timeout field is
active.
Moves cursor to Batch Events Memory
field.
Moves cursor to the Time Zone field.
Moves cursor to the Daylight Savings
Time check box.
Moves cursor to the Year Format field.
R301.1
11/06