Setting The Cee Inactive - Honeywell Experion C300 User Manual

Activate C300 Controller's CEE

Setting the CEE inactive

Step
The CEE turns green on the Monitoring Tree.
• Remember that the CEE must be active for anything assigned to the CEE
to work. Even if a CM is active, it won't do anything unless the CEE is also
active.
Alternate methods:
• Click the Toggle State toolbar button
−
Setting the CEE inactive
Follow the steps in the table below to set the CEE inactive.
Step
1
From the Monitoring Tree, right-click the CEE.
2
Click Change State... and the following dialog appears.
174
Select Operate -> Change State...
Experion C300 Controller User's Guide
Honeywell
Action
to set the selected item active.
Action
R301.1
11/06