Table of Contents
Advertisement
Controller Components
This procedure describes how to access the components inside the controller.
1
Loosen the single captive screw securing the Terminal Module access panel.
The panel is located at the bottom of the enclosure.
2
Push down on the finger grips at the top of the access panel.
3
Slide the panel down to release it.
4
Pull the panel outward.
Pull it until the door is approximately at a right-angle to the enclosure.
5
Push the panel inward toward the enclosure.
This locks it in the open position and provides two handed access to the cable entries, etc.
16-wire Terminal
TP1MAN Issue 3 Apr 06 (MAN0630)
Block
Terminal Module
Terminal Plastic Cover
On/Off Switch
Fuse
3-wire Terminal Block
Installation
12
Advertisement
Table of Contents
