Use Gloves with the Touch Screen
You can use many off-the-shelf gloves, including leather, when operating the
touch screen on the computer. The gloves can be up to 2 mm (0.08 inches) thick.
Use this procedure to set the touch screen to "glove mode."
1. Press the flat part of the gloved finger to the touch screen. You want to have
2. Tap the screen subsequently to use it with your gloved hands.
3. Exit "glove mode" by tapping the screen with your bare finger.
The Good Read LED
The Good Read LED indicates the status of the scanner. For more information on
how to scan bar codes, see
Good Read LED
LED Color
Green
Blinking green
Configure the Screen Backlight
The display has an ambient light sensor that automatically adjusts the backlight
intensity to conserve power and ensure the display is readable. You can set the
backlight intensity level as needed for your environment.
1. Tap All Apps > Settings > System > Display.
2. Tap the toggle box to turn Automatically adjust display brightness On or Off. If
Audio Features
The CT50 has a speaker, a microphone, and several software tools for configuring
the volume of sounds.
Dolphin CT50 with Windows 10 IoT User Guide
approximately 13 mm (0.51 inch) surface area touching the screen, almost as if
taking a fingerprint.
Description
Good read of a bar code.
The data collection engine is processing or starting up.
Automatic Adjust is turned off, use the slider to set the Brightness level.
Scan a Bar Code,
beginning on page 26.
13