Set The Profile Rule On The Phone; Service Interruption Message On Home Screen - Cisco 8832 Manual

Your Phone
Procedure
Step 1
Press Sign in.
Step 2 Enter your user ID and password.
The password field uses two types of input methods; alphanumeric and numeric. While you type in the
password, you see Options softkey on the phone. You can use this softkey to change the current password
input type. Select Input all for alphanumeric input and select Input num for numeric entry.
Step 3 Press Save.
Note
Sign Out of a Phone as a Guest
Procedure
Step 1
Press Guest Out.
Step 2 Press Sign Out.

Set the Profile Rule on the Phone

Procedure
Step 1 Press Settings.
Step 2 Select Device administration > Profile rule.
Step 3 Enter the profile rule using the phone keypad.
Step 4
Press Resync.

Service Interruption Message on Home Screen

When Webex cloud server is not available, you will see Service interruption notification on the phone home
screen and the line status shows the survivability icon. During this situation, phone gets connected to the Site
Survivability Gateway (SGW) so that you can use at least basic calling features. SGW services are deployed
An administrator can set up a phone to make emergency calls. Whenever you sign in as a guest to a registered
phone, the phone transfers a request to obtain the location of the phone. The location is sent to the emergency
services when you make an emergency call.
Sign Out of a Phone as a Guest
Your Phone
15