Phone Setup
Phone Setup
Typically, your administrator sets up your phone and connects it to the network. If your phone is not set up
and connected, contact your administrator for instructions.
Ways to Provide Power to Your Conference Phone
Your conference phone needs power from one of these sources:
• Power over Ethernet (PoE), which your network supplies.
• Cisco IP Phone Power Injector.
The following figure shows the PoE and midspan cable power options.
Figure 1: Conference Phone Power Options
Connect to the Network
You need to connect the phone to the telephone network.
• Wired connection—The phone is plugged into the network using an Ethernet cable.
Sign into Your Extension from Another Phone
If extension mobility is configured, you can sign into a different phone in your network and have it act the
same as your phone. After you sign in, the phone adopts your personal directory number.
Procedure
Step 1
Press Sign in.
Step 2
Enter your username and password, then press Sign in.
Step 3
Press Sign out to sign out of your extension.
Cisco IP Conference Phone 7832 Multiplatform Phone User Guide
2
Your Phone