View The Phone Status; View The Status Messages On The Phone - Cisco 6800 Series User Manual

Your Phone
• Network status—Indicates if the phone is connected to a network.
• IPv4—IP address of the phone. You can see information on IP address, VLAN ID, Addressing type, IP
• IPv6—IP address of the phone. You can see information on IP address, VLAN ID, Addressing type, IP
• MAC address—Unique Media Access Control (MAC) address of the phone.
• Host name—Displays the current host name assigned to the phone.
• Domain—Displays the network domain name of the phone. Default: cisco.com
• Switch port link—Status of the switch port.
• Switch port config—Indicates speed and duplex of the network port.
• PC port config—Indicates speed and duplex of the PC port.
• PC port link—Indicates speed and duplex of the PC port.

View the Phone Status

Procedure
Step 1
Press Applications
Step 2
Select Status > Phone Status > Phone Status.
You can view the following information:
• Elapsed time—Total time elapsed since the last reboot of the system
• Tx (Packets)—Transmitted packets from the phone.
• Rx (Packets)—Received packets from the phone.

View the Status Messages on the Phone

Procedure
Step 1
Press Applications
Step 2
Select Status > Status messages.
You can view a log of the various phone statuses since provisioning was last done.
Note
status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.
status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.
.
.
Status messages reflect UTC time and are not affected by the timezone settings on the phone.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
View the Phone Status
33