Set Device Authentication Field - Cisco Unified 6921 Administration Manual

802.1X Authentication and Status
Option
EAP-MD5
Transaction Status

Set Device Authentication Field

Procedure
Step 1 Choose Applications > Admin Settings > Security Config > 802.1X Authentication > Device
Authentication.
Step 2 Press Edit.
Step 3 Set the Device Authentication option to Enabled or Disabled.
Step 4
Press Save.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications
Manager 10.0 (SCCP and SIP)
16
Description
Device ID: A derivative of the phone
model number and unique MAC
address displayed in this format:
CP-<model>-SEP-<MAC>
Shared Secret: Choose a password to
use on the phone and on the
authentication server. The password
must be between 6 and 32 characters,
consisting of any combination of
numbers or letters.
If you disable 802.1X
Note
authentication or perform a
factory reset of the phone, the
shared secret is deleted.
Realm: Indicates the user network
domain, always set as Network.
Displays the transaction status of your
802.1X Authentication.
Cisco Unified IP Phone Settings
To Change
Display only. Cannot configure.
Set EAP-MD5 Shared Secret Field, on
page 17
Display only. Cannot configure.
To view the transaction status of your
802.1X Authentication, choose
Applications > Admin Settings > Security
Configuration > 802.1X Authentication
Status.