Installation; Required Tools; Table 1: Tools Required - Honeywell SLG 700 Quick Start Manual

INSTALLATION

Evaluate the site selected for the SmartLine Level Guided Wave Radar (GWR)
installation with respect to the process system design specifications and
Honeywell's published performance characteristics.

Required tools

Note: The following tools are not supplied with the Transmitter.
Mounting hardware (nuts and bolts for flanged unit) and tools
Allen keys:
Coaxial coupler (SCA, SCC, SCD)
•
Rook, Electronics housing
•
End weight (SWA, SWB)
•
Wrenches:
Rod probe (8mm) (SRA, SRH, SRJ)
•
Rod probe (16mm) (SRC, SRK, SRL)
•
Saturated Steam reference reflector
•
Mounting thread ¾" and 1" (SLG 720)
•
Mounting thread 1½" (SLG 720)
•
Mounting thread 2" (SLG 720)
•
 Mounting thread 1½", 2" (SLG 726)
 Coaxial probe outer process connector
(SCA, SCB)
 Coaxial probe outer process connector
(SLG 720, SCA, SCB)
 Coaxial probe outer process connector
(SLG 720, SCA, SCB)
 Probe nut (8mm)
 Probe nut (16mm)
 Probe nut (saturated steam)
To shorten rod and coaxial probes
To shorten wire probes
To drill hole in coaxial outer tube (SLG 720)
Wire cutter / stripper
M20 conduit entry plugs
½" NPT conduit entry
½" to ¾" NPT adapter
4

Table 1: Tools required

Quick Start Installation Guide
AF 1.5 mm
AF 2.0mm
AF 2.5 mm
AF 7 mm
AF 14 mm
AF 20 mm
AF 40 mm
AF 50 mm
AF 60 mm
AF 60 mm
Process compatible thread locking
compound (i.e. Loctite 242)
Retaining ring pliers for internal
diameter 20 mm
Retaining ring pliers for internal
diameter 40mm
AF 8 mm
AF 14 mm
AF 20 mm
Saw
Saw or bolt cutter
Drill and 6.0 mm drill bit
10 mm hex wrench
1¼" wrench
1¼" wrench
December 2017