Operating Conditions; Process Connector; See The Wiring Section For More Information On Grounding; Table 2: Operating Conditions - Honeywell SLG 700 Quick Start Manual

Operating conditions

Parameter
Ambient Temperature
Humidity %RH
1
LCD Display operating temperature -20°C to +70°C. Storage temperature -30°C
to 80°C.

Process connector

Throughout this Quick Start Guide, there are references to the process
connector on the transmitter. See Step 5 of the probe assembly steps for
equipment specifications.
The process connector has three functions:
Separates the process environment from the external environment.
•
Attaches the transmitter to a tank with a threaded or flanged connection.
•
Brackets are not required.
Provides electrical feed-through to the probe.
•
Note: This Quick Start Guide uses the term "threaded", which refers to
milling that allows a segment to be screwed into another segment.
CAUTION: Ensure the Electronic Housing is grounded before
lowering a probe into a tank by using the internal terminal or
external terminal to connect the transmitter to earth ground.

See the WIRING section for more information on grounding.

December 2017

Table 2: Operating Conditions

Operative Limits
°C
-40 to 85 -40 to 185
1
0 to 100

Figure 1: Transmitter components

Quick Start Installation Guide
Transportation and Storage
°F °C
-55 to 120
0 to 100
°F
-67 to 248
5