Biss Ca Configuration Command - Cisco D9800 Reference Manual

API Definitions
If successful, the following is an example of the return body:
"response": {
}
GET Examples:
Example 2: Retrieve the full PowerVu CA Settings
The following example assumes that the user has successfully logged onto the unit, received the session id
and set it to the variable token. In addition, it is assumed that the IP of the unit is 192.168.0.1. You must
change the IP to the specific unit IP in use.
curl -X GET -i -H "Accept: application/json" -H "X-SESSION-ID: $token" -k
"https://192.168.0.1/ws/v2/service_cfg/ca/pvu"
If successful, the following is an example of the return body:
"ca": {
}
Running with the specific camode argument will return the same response as above, as PowerVu CA only
Note
has one argument.

BISS CA Configuration Command

Table 199: Command Details
Command Detail
Command URL
Command Information
HTTP Methods
Access Type
Access Level
GET Syntax
"code": "10",
"result": "success",
"message": ""
"pvu": {
"camode": "Std"
}
Description
https://192.168.0.1/ws/v2/service_cfg/ca/biss
Allows set or get of BISS Conditional Access configuration.
GET, POST
Read, Write
User, Admin
All BISS Settings:
GET "https://192.168.0.1/ws/v2/service_cfg/ca/biss"
Single BISS Setting:
GET "https://192.168.0.1/ws/v2/service_cfg/ca/biss?bissmode"
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
CA (Conditonal Access) Configuration Commands
235