Cisco D9800 Reference Manual page 252

CA (Conditonal Access) Configuration Commands
Command Detail
Access Level
GET Syntax
POST Syntax
Setting parameters using
command line arguments is
limited to maximum of 26
arguments after the ?.
URI Parameters (extension to the Command URL separated by /): N/A
Note
Table 204: URI Query/Set Arguments (possible fields and values preceded by ? and separated by &)
URI Argument
peid
cidecrypt
cipe1slot
cislot
POST Examples:
Example 1: Set various PE Setting Arguments
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
240
Description
User, Admin
All PE CA Settings:
GET "https://192.168.0.1/ws/v2/service_cfg/ca/pe"
Single PE CA Setting:
GET "https://192.168.0.1/ws/v2/service_cfg/ca/pe? peid=1&cidecrypt
POST "https://192.168.0.1/ws/v2/service_cfg/pe? peid=1&cidecrypt=ON"
These arguments are intended to be used with POST. When this command is used as a GET command
these arguments generally serve as output field descriptions.
Description
Program Entry ID
Type: Integer
Value: 1..32
Program CAM Decrypt Mode
Type: String
Value: "OFF", "ON", "Comp"
CAM Slot for Program Entry 1
Type: String
Value: "TOP", "BOTTOM", "AUTO"
CAM Slot for Program Entries other the PE1
Type: String
Value: "TOP", "BOTTOM"
API Definitions