Cisco D9800 Reference Manual page 179

API Definitions
Command Detail
GET Syntax
POST Syntax
URI Parameters (extension to the Command URL separated by /): N/A
Note
Note
Table 148: URI Query/Set Arguments (possible fields and values preceded by ? and separated by &)
URI Argument
stream (Key)
act
netid
acqmode
camode
Description
GET "https://192.168.0.1/ws/v2/service_cfg/input/zixi", or
GET "https://192.168.0.1/ws/v2/service_cfg/input/zixi?
stream=[stream#]"
POST "https://192.168.0.1/ws/v2/service_cfg/input/zixi?
stream=[stream#]&cmdrow=Add..."
Setting Parameters using command line arguments are limited to maximum of 26 arguments after
the ?.
All of the URI Arguments in the table apply to both GET and POST. For GET, the URI arguments
do not need any values, except the stream which must be specified. For POST, the stream must be
specified followed by any of the below URI arguments and the associated value the user would like
to set. In-depth CURL examples can be seen below following the table.
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
Description
Multi Input Stream ID
Type: Integer
Values: 1..32
Activate Input
Type: String
Values: "Yes" or "No"
Network Identifier
Type: Integer
Values: 0 ... 65535
Select which tables are required for service list creation.
Type: String
Values: "Basic", "Auto", "Custom","FixPID"
Select how programs that are marked as encrypted (and can not
be decrypted) are handled.
Type: String
Values: "Std", "Open"
Zixi Input Configuration Command
167