Cisco D9800 Reference Manual page 254

CA (Conditonal Access) Configuration Commands
Command Detail
GET Syntax
POST Syntax
Setting parameters using
command line arguments is
limited to maximum of 26
arguments after the ?.
URI Parameters (extension to the Command URL separated by /): N/A
Note
Table 206: URI Query/Set Arguments (possible fields and values preceded by ? and separated by &)
URI Argument
idx (Key)
Mandatory for POST command
peid
mode
pid
strmcat
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
242
Description
All CICOMP CA Settings:
GET "https://192.168.0.1/ws/v2/service_cfg/ca/cicomp"
Single CICOMP CA Setting:
GET "https://192.168.0.1/ws/v2/service_cfg/ca/cicomp?
peid=1&cidecrypt"
POST "https://192.168.0.1/ws/v2/service_cfg/ca/cicomp?
idx=5&peid=1&cidecrypt=ON&oper=Add"
These arguments are intended to be used with POST. When this command is used as a GET command
these arguments generally serve as output field descriptions
Description
Index of Row in UIC Table
Type: Integer
Value: 1..64
Program Entry ID
Type: Integer
Value: 1..32
CI Component Mode
Type: String
Value: "PID", "STREAM"
CI Component PID
Type: Integer
Value: 0..8192
Stream Category
Type: String
Value: "VID", "AUD", "SUBT", "TTX", "USER"
API Definitions