Cisco D9800 Reference Manual page 273

API Definitions
Command Detail
POST Syntax
Setting Parameters using
command line arguments is
limited to maximum of 26
arguments after the ?.
URI Parameters (extension to the Command URL separated by /): N/A
Note
Table 218: URI Query/Set Arguments (possible fields and values preceded by ? and separated by &)
URI Argument
csirec (Key)
rowstatus
input
netid
dnlkfreq
symrate
mod
Description
POST, for example,
"https://192.168.0.1/ws/v2/service_cfg/dr/tuning?csirec=1&dnlkfreq=3.53"
For POST, the value for the argument seen below must be specified, but for GET, there are no values
for arguments.
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
Description
Record index of D/R backup tuning configuration
Type: Integer
Values: 1 ... 3
D/R backup tuning status
Type: String
Values: "Active", "Inactive"
D/R backup tuning RF input selection
Type: String
Values: "RF1", "RF2", "RF3", "RF4"
D/R backup tuning network id
Type: Integer
Values: 0 ... 65535
D/R backup tuning Frequency [GHz]
Type: Float
Values: 0.0 ... 15.0
D/R backup tuning RF symbol rate
Type: Float
Values: 1.0 ... 45.0
D/R backup tuning RF modulation system
Type: String
Values: "DVB-S", "DVB-S2"
Disaster Recovery (D/R) Configuration API
261