Cisco D9800 Reference Manual page 172

Input Configuration Command
URI Argument
data3sel
data3avail
data3Enabled
data4sel
data4avail
data4Enabled
Table 144: URI Set Arguments (possible fields and values preceded by ? and separated by &)
URI Argument
stream (Key)
dat1srcaddr
dat2srcaddr
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
160
Description
DATA3 selection state. DATA3 is either selected or not selected.
Type: String
Value: "Yes", "No"
IP is present in the DATA3 stream.
Type: String
Value: "Yes", "No"
Allow DATA3 to be selected or not.
Type: String
Value: "Yes", "No"
DATA4 selection state. DATA4 is either selected or not selected.
Type: String
Value: "Yes", "No"
IP is present in the DATA4 stream.
Type: String
Value: "Yes", "No"
Allow DATA4 to be selected or not.
Type: String
Value: "Yes", "No"
Description
Stream ID
Type: Integer
Values: 1 ... 32
Set the IP address to lock from DATA1.
Type: String
Value: IP address in the dot format, for example, 192.168.0.1
Set the IP address to lock from DATA2.
Type: String
Value: IP address in the dot format, for example, 192.168.0.1
API Definitions