Cisco D9800 Reference Manual page 191

API Definitions
Table 155: MOIP, MOIP1, or MOIP2 Next level names (after Port Name)
MOIP, MOIP1, or MOIP2 Next Level
Name
mode
dscrmode
ratemode
rate
insertnul
mcastip
destport
fecscheme
tpperframe
Description
Output Mode
Type: String
Values: "No Output", "Passthrough", "Service Channels Only", "Map
Passthrough", "Map Service Channels Only", "Transcoding"
Output Descrambling Mode
Type: String
Values: "Descrambled", "Scrambled"
Output Rate Control Mode
Type: String
Value: "User"
Output Rate
Type: Float
Values: 0.0 ..... 206.0
Insert Null Packet
Type: String
Values: "Yes", "No"
insertnul="No" is not allowed with ratemode="User"
Set valid SAP destination IP address (multicast only)
Type: String
Value: IP address in dot format, for example, 224.2.127.254
Set the SAP UDP destination port number
Type: Integer
Value: 1024..65534
FEC arrangement : Block-aligned (0) or Non Block-aligned
Type: String
Values: "Block Aligned", "Non-Block Aligned"
Set the number of transport packets to be sent per IP packet
Type: Integer
Value: 1..7
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
Output Configuration Command
179