Xstatus Video Input Hdmi [1] Connected; Xstatus Video Input Hdmi [1] Signalstate; Xstatus Video Input Source [1 - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction
xStatus Video Input Source [1..3] Resolution RefreshRate
Shows the resolution refresh rate (Hz) for the video input source.
Value space of the result returned:
<0..300>
Example:
xStatus Video Input Source 1 Resolution RefreshRate
*s Video Input Source 1 Resolution RefreshRate: 50
** end
xStatus Video Input Source [1..3] Resolution FormatType
Shows the resolution format type for the video input source.
Value space of the result returned:
<Unknown/AnalogCVTBlanking/AnalogCVTReducedBlanking/AnalogGTFDefault/
AnalogGTFSecondary/AnalogDiscreteTiming/AnalogDMTBlanking/AnalogCEABlanking/Digital>
Example:
xStatus Video Input Source 1 Resolution FormatType
*s Video Input Source 1 Resolution FormatType: Digital
** end
xStatus Video Input Source [1..3] Resolution FormatStatus
Shows the resolution format status for the video input source.
Value space of the result returned:
<Ok/AnalogOutOfRange/AnalogNotFound/Interlaced/Error/Unknown>
Example:
xStatus Video Input Source 1 Resolution FormatStatus
*s Video Input Source 1 Resolution FormatStatus: Ok
** end
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration
xStatus Video Input Source [1..3] MediaChannelId

xStatus Video Input HDMI [1] Connected

xStatus Video Input HDMI [1] SignalState

171
xCommand
Not in use in this release.
Value space of the result returned:
<Integer>
Example:
xStatus Video Input Source MediaChannelId
*s Video Input Source 1 MediaChannelId: 2
*s Video Input Source 2 MediaChannelId: 3
** end
Shows if there is something connected to the HDMI connector. Not all connections can be detected.
Value space of the result returned:
<True/False/Unknown>
Example:
xStatus Video Input HDMI 1 Connected
*s Video Input HDMI 1 Connected: True
** end
Shows the signal state for the HDMI input.
Unknown: The signal format is unknown.
OK: A signal is detected and the signal format is supported.
Unsupported: A signal is detected, but the signal format is not supported.
Value space of the result returned:
<Unknown/OK/Unsupported>
Example:
xStatus Video Input HDMI 1 SignalState
*s Video Input HDMI 1 SignalState: OK
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.