Licensing For Cisco Rise; Guidelines And Limitations For Auto Policy-Based Routing - Cisco Nexus 7000 Series Configuration Manual

Licensing for Cisco RISE

• Two appliances are each connected to a different VDC in the same Cisco Nexus Series switch.
In each of the preceding topologies, one appliance is active and the other is in standby. Each connection acts
as a separate service and is unaware of the other service. Each appliance sends APBR rules to the service in
each VDC or in each switch, depending upon the topology. Each service sends the appropriate response to
the appliance to which it is connected.
When a failover occurs, the standby appliance becomes the new active appliance. The old active appliance
sends a PURGE message to the service. After the APBR purge is complete and the old active appliance
receives a response, the appliance sends fresh APBR rules. Sending fresh rules ensures that the stale
configuration does not remain on the old active appliance
Licensing for Cisco RISE
The following table shows the licensing requirements for this feature:
Product
Cisco
NX-OS
Citrix
Citrix
Netscaler
Application
Delivery
Controller
(ADC)
operation
system

Guidelines and Limitations for Auto Policy-Based Routing

Auto policy-based routing (APBR) has the following guidelines and limitations:
• The globally configured Use Source IP (USIP) takes precedence only when the user does not specify a
• If the USIP option is set on a service or service group by way of inheritance at the time you create either
• If you modify a global property, such as USIP, after you create a service or service group, the global
• One RS cannot be connected through multiple VLAN interfaces. However, one or more RSs can be
• Multiple next-hop IP addresses for the same RS are not supported in RISE
Cisco Remote Integrated Service Engine for Citrix NetScaler Appliances and Cisco Nexus 7000 Series Switches
Configuration Guide
52
License Requirements
The Cisco Remote Integrated Services Engine (RISE) requires the Enhanced Layer 2 Package
on the Cisco Nexus 7000 Series switch. For a complete explanation of the Cisco NX-OS
licensing scheme and how to obtain and apply licenses, see the Cisco NX-OS Licensing Guide.
The Cisco Remote Integrated Services Engine (RISE) does not require a license on the Citrix
NetScaler Application Delivery Controller (ADC) appliance for auto-attach.
Advanced features, such as auto policy-based routing (APBR), require the NetScaler Platinum
or Enterprise license on the Citrix NetScaler Application Delivery Controller (ADC) appliance.
To display the license status, use the show license command in the NetScaler command line
interface
local choice for the USIP option.
the service or group, the option is sticky on that service or group.
modification does not apply to either the service or group. However, you can modify a service or group
locally by using the set commands.
connected through the same interface on the Cisco Nexus device to which the APBR policy is applied.
Configuring Auto Policy-Based Routing