Troubleshooting The Rise Configuration On The Switch - Cisco Nexus 7000 Series Configuration Manual

Troubleshooting the RISE Configuration on the Switch

Troubleshooting the RISE Configuration on the Switch
Step 1 switch# show rise detail
switch# show rise detail
RISE module name: ns21
State: inactive
inactive reason:
Admin state: enabled
Interface: N/A
Mode: indirect
Slot id: 300
Service token: 0x0
Serial number: HE2H81UJ47
SUP IP: 3.101.0.10
RISE IP: 3.3.3.21
VDC id: 1
VLAN: 3
VLAN group: 21
VLAN list: 121,222-224,231-234
Displays the detailed RISE configuration status on the Cisco Nexus Series switch. The output shows the state of the
RISE service. If the service is inactive, the Inactive Reason field explains the reason for this state. The following reasons
might appear in the Inactive Reason field in the output of the show rise detail command:
• Service table is full.
• Another service is already using this port.
• Error in bootstrap response.
• Timed out while waiting for bootstrap response
• Control VLAN interface is not operational.
• RISE interface is not operational.
• RISE interface does not have control VLAN as trunk member.
• Control VLAN interface does not have valid IP.
• RISE port channel has no member ports.
• RISE IP is already assigned to another service.
Step 2 switch# show tech-support services
Displays detailed troubleshooting information for RISE on the Cisco Nexus Series switch.
Cisco Remote Integrated Service Engine for Citrix NetScaler Appliances and Cisco Nexus 7000 Series Switches
Configuration Guide
66
Control VLAN interface is not operational.
Troubleshooting RISE Integration