Finding Feature Information; Licensing For Cisco Rise; Prerequisites For Configuring Rise; Guidelines And Limitations - Cisco Nexus 7000 Series Configuration Manual

Finding Feature Information

Finding Feature Information
Your software release might not support all the features documented in this module. For the latest caveats
and feature information, see the Bug Search Tool at
for your software release. To find information about the features documented in this module, and to see a list
of the releases in which each feature is supported, see the "New and Changed Information" chapter or the
Feature History table below.

Licensing for Cisco RISE

The following table shows the licensing requirements for this feature:
Product
Cisco
NX-OS
Citrix
Citrix
Netscaler
Application
Delivery
Controller
(ADC)
operation
system

Prerequisites for Configuring RISE

The RISE feature has the following prerequisites:
• Cable and power up the NetScaler Application Delivery Controller (ADC) appliance. See the "Preparing
• For direct connect mode, create an interface or port channel on the Cisco Nexus Series switch and add
• For indirect connect mode, the RISE-enabled appliance must be configured with IP connectivity to the

Guidelines and Limitations

This section includes the following topics:
Cisco Remote Integrated Service Engine for Citrix NetScaler Appliances and Cisco Nexus 7000 Series Switches
Configuration Guide
16
License Requirements
The Cisco Remote Integrated Services Engine (RISE) requires the Enhanced Layer 2 Package
on the Cisco Nexus 7000 Series switch. For a complete explanation of the Cisco NX-OS
licensing scheme and how to obtain and apply licenses, see the Cisco NX-OS Licensing Guide.
The Cisco Remote Integrated Services Engine (RISE) does not require a license on the Citrix
NetScaler Application Delivery Controller (ADC) appliance for auto-attach.
Advanced features, such as auto policy-based routing (APBR), require the NetScaler Platinum
or Enterprise license on the Citrix NetScaler Application Delivery Controller (ADC) appliance.
To display the license status, use the show license command in the NetScaler command line
interface
for RISE Integration" chapter for information on connecting the Cisco NetScaler Application Delivery
Controller (ADC) appliance.
all relevant management and data VLANs for the NetScaler Application Delivery Controller (ADC)
appliance. See the Cisco Nexus Series NX-OS Interfaces Configuration Guideor information.
Cisco Nexus switch with Layer 2 adjacency.
https://tools.cisco.com/bugsearch/
Configuring RISE
and the release notes