Monitoring Cisco Rise - Cisco Nexus 7000 Series Configuration Manual

Monitoring Cisco RISE

The following example is partial sample output from the show system internal ISCM event-history
debugs[detail] command:
switch# show system internal ISCM event-history debugs
1) Event:E_DEBUG, length:45, at 451405 usecs after Fri Nov 25 00:39:14 2011
]
2) Event:E_DEBUG, length:49, at 451400 usecs after Fri Nov 25 00:39:14 2011
3) Event:E_DEBUG, length:49, at 451395 usecs after Fri Nov 25 00:39:14 2011
The following example is partial sample output from the show system internal ISCM event-history-errors
command:
switch# show system internal ISCM event-history-errors
1) Event:E_DEBUG, length:45, at 771310 usecs after Fri Nov 25 00:41:01 2011
2) Event:E_DEBUG, length:49, at 771305 usecs after Fri Nov 25 00:41:01 2011
3) Event:E_DEBUG, length:49, at 771301 usecs after Fri Nov 25 00:41:01 2011
...
The following example is partial sample output from the show system internal ISCM event-history-all
command:
switch# show system internal ISCM event-history-all
1) Event:E_DEBUG, length:45, at 341769 usecs after Tue Nov 29 21:25:32 2011
2) Event:E_DEBUG, length:49, at 341764 usecs after Tue Nov 29 21:25:32 2011
3) Event:E_DEBUG, length:49, at 341759 usecs after Tue Nov 29 21:25:32 2011
The following example is partial sample output from the show system internal ISCM event-history warnings
command:
switch# show system internal ISCM event-history warnings
1) Event:E_DEBUG, length:74, at 760859 usecs after Thu Nov 24 21:19:16 2011
etc...
Monitoring Cisco RISE
Use the show rise profile command on the Citrix Netscaler Application Delivery Controller (ADC) appliance
to display RISE statistics, as shown in the following example:
For vPC mode (direct):
mpx24> show rise profile
1)
Cisco Remote Integrated Service Engine for Citrix NetScaler Appliances and Cisco Nexus 7000 Series Switches
Configuration Guide
44
[104] ISCM_demux(1198):[FU_EVENT_CAT_MTS_MSG
[104] ISCM_demux(1190):[Got a message event cat 1]
[104] ISCM_demux(1189):[Got a message event cat 1]
[104] ISCM_demux(1198):[FU_EVENT_CAT_MTS_MSG]
[104] ISCM_demux(1190):[Got a message event cat 1]
[104] ISCM_demux(1189):[Got a message event cat 1]
[104] ISCM_demux(1198):[FU_EVENT_CAT_MTS_MSG]
[104] ISCM_demux(1190):[Got a message event cat 1]
[104] ISCM_demux(1189):[Got a message event cat 1]
[103] ISCM_restore_pss_data(577):[(Error) 0x40480010 in pss2_move2location]
Service Name : mpx24
Status : Active
Mode : vPC-Direct
Device Id : FOC2865R92P
Slot Number : 300
VDC Id : 1
vPC Id : 510
SUP IP : 172.16.0.2
VLAN : 10
VLAN Group : 1
ISSU : None
Interface : LA/1 : 10/3 10/4
Configuring RISE