Configuring RISE
Configuring NSIP Using the Configuration Utility
Before You Begin
• Create a port channel on the Citrix NetScaler Application Delivery Controller (ADC) appliance and map
Step 1
Navigate to System > Settings.
Step 2
In the details pane, under Settings, click Change NSIP Settings.
Step 3
In the Configure NSIP Settings dialog box, set the parameters. For a description of a parameter, hover the mouse cursor
over the corresponding field.
Step 4
Under Interfaces, choose the interfaces from the Available Interfaces list and click Add to move them to the Configured
Interfaces list.
Step 5
Click OK. In the Warning dialog box, click OK. The configuration takes effect after the Citrix NetScaler Application
Delivery Controller (ADC) appliance is restarted.
Configuring a NSVLAN on Citrix NetScaler Application Delivery Controller (ADC) Appliance
The NSVLAN is a VLAN to which the NetScaler management IP (NSIP) address's subnet is bound. The NSIP
subnet is available only on interfaces that are associated with NSVLAN. By default, NSVLAN is VLAN1,
but you can designate a different VLAN as NSVLAN. If you designate a different VLAN as an NSVLAN,
you must reboot the Citrix NetScaler Application Delivery Controller (ADC) appliance for the change to take
effect. After the reboot, NSIP subnet traffic is restricted to the new NSVLAN.
Perform only one of the following tasks:
Configuring NSVLAN Using the CLI
Enter the following commands prompt to configure NSVLAN using the CLI:
Before You Begin
• Create a port channel on the Citrix NetScaler Application Delivery Controller (ADC) appliance and map
• Configure the NS IP address (NSIP) on the appliance.
Step 1
set ns config - nsvlan positive_integer - ifnum interface_name ... [-tagged (YES | NO)]
You must reboot the appliance for the configuration to take effect.
Note
Step 2
(Optional) show ns config
set ns config -nsvlan 300 -ifnum 1/1 1/2 1/3 -tagged NO
save config
its physical ports to this port channel.
its physical ports to this port channel.
Cisco Remote Integrated Service Engine for Citrix NetScaler Appliances and Cisco Nexus 7000 Series Switches
Configuring RISE in a vPC Indirect Mode Deployment
Configuration Guide
37