Configuring Rise - Cisco Nexus 7000 Series Configuration Manual

Configuring RISE

This chapter describes how to configure the Remote Integrated Service Engine (RISE) feature on the Cisco
Nexus Series switches and the Cisco NetScaler Application Delivery Controller (ADC) appliance. The Cisco
NX-OS software supports the Cisco Nexus Series switches, which includes the Cisco Nexus Series switches.
You can find detailed information about supported hardware in the Cisco Nexus Series Hardware Installation
and Reference Guide.
This chapter includes the following sections:
• Finding Feature Information, page 16
• Licensing for Cisco RISE , page 16
• Prerequisites for Configuring RISE, page 16
•
Guidelines and Limitations, page 16
• Default Settings for RISE, page 17
• Accessing the Switch and Appliance Interfaces , page 18
• Configuring Cisco RISE in a Direct Mode Deployment, page 21
• Configuring RISE in an Indirect Mode Deployment, page 24
• Configuring RISE in vPC Mode (Recommended Deployment Mode), page 29
• Route Health Injection, page 38
• Intelligent Service Card Manager, page 38
• Intelligent Service Card Client, page 39
• Universal Routing Information Base, page 39
• Verifying the RISE Configuration, page 39
• Verifying the ISCM Configuration, page 41
• Monitoring Cisco RISE, page 44
• Configuration Examples for RISE, page 45
• Related Documents, page 47
• Feature History for RISE, page 47
Cisco Remote Integrated Service Engine for Citrix NetScaler Appliances and Cisco Nexus 7000 Series Switches
4
C H A P T E R
Configuration Guide
15