Cisco Nexus 7000:Licensing An Fcoe Module - Cisco Nexus 7000 series Configuration Manual

Cisco Nexus 7000:Licensing an FCoE Module

Command or Action
Step 12
copy running-config startup-config
Example:
switch-fcoe-vdc# copy running-config
startup-config
Cisco Nexus 7000:Licensing an FCoE Module
You must associate an FCoE license with an FCoE module to configure FCoE. You need one license for each
module configured for FCoE.
Before You Begin
• Ensure you have installed the correct license for FCoE.
SUMMARY STEPS
1. configure terminal
2. license fcoe module module-number
3. (Optional) show license usage FCOE-N7K-F132XP
4. (Optional) copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
swtich(config)#
Step 2 license fcoe module module-number
Example:
swtich(config)#
Step 3
show license usage FCOE-N7K-F132XP
Example:
swtich(config)# show license usage FCOE-N7K-F132XP
Step 4 copy running-config startup-config
Example:
swtich(config)# copy running-config startup-config
Cisco NX-OS FCoE Configuration Guide for Nexus 7000 and MDS 9500
42
license fcoe module 2
Storage VDC on Cisco Nexus 7000 Series Switches
Purpose
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Enters configuration mode.
Associates an FCoE license to a module.
(Optional)
Displays information about which FCoE modules
are using FCoE licenses.
(Optional)
Copies the running configuration to the startup
configuration.
OL-25809-02