Convert 369 Files - GE 869 Instruction Manual

CHAPTER 3: INTERFACES

Convert 369 Files

Conversion Summary
Report
CAUTION:
869 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
5. To select the SR settings file used for initialization, click the Initialize Settings from SR
Settings File button.
6. To locate and select the file to convert, click the button beside the Initialize Settings
from SR Settings File box.
7. Click OK to begin the conversion and complete the process. Once this step is
completed, the new file, with a complete path, is added to the EnerVista 8 Series
Setup software environment.
EnerVista 8 Series Setup version 1.3x and above supports conversion of all 369 files as
long as they are from a 32-bit PC. If the file is 16-bit it must be converted to a 32-bit file
using the 369 EnerVista Setup before doing the 869 conversion.
At the end of the conversion process, the results are summarized in a conversion report.
The report is found under Device Definition in the offline file window.
Figure 3-26: Conversion Report in Offline Window
For future reference, the user is advised to take a printout of the conversion report
immediately after the conversion. All conversion reports are removed and become
inaccessible if the user removes or modifies the converted file from the 8 Series Setup
Software.
SOFTWARE INTERFACE
3–53