Network Assistant-Related Parameters And Their Defaults - Cisco Catalyst 4500 series Administration Manual

Hide thumbs Also See for Catalyst 4500 series:
Table of Contents

Advertisement

Chapter 15
Configuring the Catalyst 4500 Series Switch with Cisco Network Assistant

Network Assistant-Related Parameters and Their Defaults

Table 15-1
switch.
Table 15-1
Parameters
Authentication
IP address
IP HTTP port number
IP HTTPS port number
IP HTTP server
Cluster run
1. You need to set an IP address in each switch for community device discovery and for the cluster
2. Port number on the Network Assistant and the Catalyst 4500 series switch must match.
3. You can only change this value for a cluster of devices. Port number on the Network Assistant and on the
4. Required for Network Assistant to access the device.
5. Enabled only if you want to manage a cluster of devices.
Network Assistant CLI Commands
Table 15-2
Table 15-2
Command
[no] cluster enable
[no] cluster run
[no] ip http server
[no] ip http port port_number
[no] ip domain-name domain_name
[no] ip http secure-server
[no] ip http secure-port
port_number
[no] ip http max-connections
connection_number
OL_28731-01
lists the Network Assistant-related configuration parameters on a Catalyst 4500 series
Network Assistant-Related Configuration on a Catalyst 4500 Series Switch
commander.
Catalyst 4500 series switch must match. Value can be changed to any non-default number above 1024.
describes the Network Assistant-related CLI commands.
CLI Commands
Network Assistant-Related Parameters and Their Defaults
Default Value
Recommended Value
Disabled
Optional
Depends on
User selectable
community or
1
discovery option
80
Optional
443
Optional
Disabled
Enabled
Disabled
Enabled
Functions
Names the cluster.
Enables clustering.
This command is used strictly for
Note
clustering.
Configures the HTTP on a switch.
Configures the HTTP port.
Configures the domain on the switch.
Configures and enable HTTPS on a switch.
Configures the HTTPS port.
Configures the maximum concurrent
connections to the HTTP server.
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
2
3
4
5
15-3

Advertisement

Table of Contents
loading

Table of Contents