Chapter 9
Configuring Switches with Web-based Tools
Table 1
Type
Supervisors
Modules
Network Assistant-related Default Configuration
Table 2
Table 2
Feature
HTTP server
TCP/IP port number
Authentication
Cluster
1. Required for Network Assistant to access the device.
2. Port number on the Network Assistant and the Catalyst 4500 series switch must match.
3. Enabled only if you want to manage a cluster of devices.
Installing the Network Assistant
To install Network Assistant on your workstation, follow these steps:
Go to this Web address: www.cisco.com/go/NetworkAssistant.
Step 1
You must be a registered Cisco.com user as a guest, but you need no access privileges.
Click on Free Download.
Step 2
Find the Network Assistant installer, cna-1 0-windows-k9-installer.1-0-1a.exe
Step 3
Step 4
Download the Network Assistant Installer and initiate the application. (You can operate the installer
directly from the Web if your browser offers this choice.)
Network Assistant is free—there is no charge to download, install, or use it.
OL-6696-01
Hardware Supported for Network Assistant 1.0 Support (continued)
Part Number
WS-X4013+
WS-X4515
WS-X4013+TS
WS-X4124-RJ45
WS-X4148-RJ
WS-X4224-RJ45V
WS-X4248-RJ45V
WS-X4548-GB-RJ45
WS-X4424-GB-RJ45
WS-X4306-GB
lists the Network Assistant-related configuration parameters on a Catalyst 4500 series switch.
Network Assistant-related Configuration on a Catalyst 4500 Series Switch
Default Value
Recommended Value
Disabled
Enabled
80
Optional
Disabled
Optional
Disabled
Enabled
Software Configuration Guide—Release 12.2(25)EW
Configuring and Using the Network Assistant
1
2
3
9-3