Displaying Bidirectional Pim Information - Cisco Catalyst 4500 series Administration Manual

Hide thumbs Also See for Catalyst 4500 series:
Table of Contents

Advertisement

Chapter 37
Configuring IP Multicast
Vlan100 (F NS)
Vlan105 (F NS)
(*, 224.0.1.60), flags ()
Packets: 2292/0/0, Bytes: 518803/0/0
Vlan7 (A NS)
(*, 224.0.1.75), flags ()
Vlan7 (A NS)
(10.34.2.92, 239.192.128.80), flags ()
Packets: 24579/100/0, 2113788/15000/0 bytes
Vlan7 (F NS)
Vlan100 (A)
(*, 239.193.100.70), flags ()
Packets: 1/0/0, 1500/0/0 bytes
Vlan7 (A)
..
The fast-switched packet count represents the number of packets that were switched in hardware on the
corresponding route.
The partially switched packet counter represents the number of times that a fast-switched packet was
also copied to the CPU for software processing or for forwarding to one or more non-platform switched
interfaces (such as a PimTunnel interface).
The slow-switched packet count represents the number of packets that were switched completely in
software on the corresponding route.

Displaying Bidirectional PIM Information

To display bidir-PIM information, enter one of these commands:
Command
Switch(config)# show ip pim interface
[type number] [df | count]
[rp-address]
Switch(config)# show ip pim rp
[mapping | metric] [rp-address]
Displaying PIM Statistics
The following is sample output from the show ip pim interface command:
Switch# show ip pim interface
Address
198.92.37.6
198.92.36.129
10.1.37.2
The following is sample output from the show ip pim interface command with a count:
Switch# show ip pim interface count
Address
171.69.121.35
OL_28731-01
Interface
Mode
Ethernet0
Dense
Ethernet1
Dense
Tunnel0
Dense
Interface
FS
Ethernet0
*
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
Monitoring and Maintaining IP Multicast Routing
Purpose
Displays information about the elected designated
forward (DF) for each RP of an interface, along with
the unicast routing metric associated with the DF.
Displays information about configured RPs, learned by
using Auto-RP or BSR, along with their unicast routing
metric.
Neighbor
Query
Count
Interval
2
30
2
30
1
30
Mpackets In/Out
548305239/13744856
DR
198.92.37.33
198.92.36.131
0.0.0.0
37-27

Advertisement

Table of Contents
loading

Table of Contents