Cisco Catalyst 4500 series Administration Manual page 52

Contents
Understanding CFM ITU-T Y.1731 Fault Management
Configuring Y.1731 Fault Management
Managing and Displaying Ethernet CFM Information
About Ethernet OAM Protocol
Enabling and Configuring Ethernet OAM
Displaying Ethernet OAM Protocol Information
Ethernet CFM and Ethernet OAM Interaction
Configuring Y.1731 (AIS and RDI)
AIS and RDI Terminology
About Y.1731
Software Configuration Guide-Release IOS XE 3.6.0E and IOS 15.2(2)E
52
Configuring SNMP Traps
Configuring Fault Alarms
Configuring IP SLAs CFM Operation
Manually Configuring an IP SLAs CFM Probe or Jitter Operation
Configuring an IP SLAs Operation with Endpoint Discovery
Configuring CFM on C-VLAN (Inner VLAN)
Feature Support and Behavior
Platform Restrictions and Limitations
Y.1731 Terminology
64-27
Alarm Indication Signals
Ethernet Remote Defect Indication
Multicast Ethernet Loopback
Default Y.1731 Configuration
Configuring ETH-AIS
64-29
Using Multicast Ethernet Loopback
OAM Features
64-34
OAM Messages
64-34
Ethernet OAM Default Configuration
Ethernet OAM Configuration Guidelines
Enabling Ethernet OAM on an Interface
Enabling Ethernet OAM Remote Loopback
Configuring Ethernet OAM Link Monitoring
Configuring Ethernet OAM Remote Failure Indications
Configuring Ethernet OAM Templates
Configuring Ethernet OAM Interaction with CFM
Configuring the OAM Manager
Enabling Ethernet OAM
Example: Configuring Ethernet OAM and CFM
65-1
65-2
64-16
64-16
64-18
64-24
64-26
64-26
64-27
64-28
64-28
64-29
64-29
64-29
64-31
64-31
64-33
64-35
64-35
64-35
64-36
64-37
64-38
64-45
64-49
64-51
64-51
64-52
64-52
64-53
65-1
64-19
64-21
64-42
OL-30933-01