Deny Ace - Cisco Catalyst 4500 series Administration Manual

Chapter 40 Configuring Policy-Based Routing
interface fastethernet 3/1
ip policy route-map Texas
!
route-map Texas permit 10
match ip address 1
set ip next-hop 3.3.3.3
!
route-map Texas permit 20
match ip address 2
set ip next-hop 3.3.3.5

Deny ACE

The following example illustrates how to stop processing a given route map sequence, and to jump to
the next sequence. Packets arriving from source 1.1.1.1 skip sequence 10 and jump to sequence 20. All
other packets from subnet 1.1.1.0 follow the set statement in sequence 10.
access-list 1 deny ip 1.1.1.1
access-list 1 permit ip 1.1.1.0 0.0.0.255
access-list 2 permit ip 1.1.1.1
access-list 2 permit ip 2.2.2.2
!
interface fastethernet 3/1
ip policy route-map Texas
!
route-map Texas permit 10
match ip address 1
set ip next-hop 3.3.3.3
!
route-map Texas permit 20
match ip address 2
set ip next-hop 3.3.3.5
OL_28731-01
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
Policy-Based Routing Configuration Examples
40-13