Cisco Catalyst 4500 series Administration Manual page 270

Configuring a VSS
Received id: e8b7.488e.b7c0
Expected id: e8b7.488e.b700
This example shows how to display the summary status for dual-active detection when recovery is
triggered by RRP rather than PagP:
Switch# show switch virtual dual-active summary
Switch(recovery-mode)# show switch virtual dual-act summary
Pagp dual-active detection enabled: Yes
In dual-active recovery mode: Yes
Triggered by: RRP
This example shows how to display PAgP status and the channel groups with trust mode enabled:
Switch# show pagp dual-active
PAgP dual-active detection enabled: Yes
PAgP dual-active version: 1.1
Channel group 25 dual-active detect capability w/nbrs
Dual-Active trusted group: Yes
Port
Gi1/3/11
Gi2/2/12
This example shows how to display the status of links configured as fast-hello:
Switch# show switch virtual dual-active fast-hello
Executing the command on VSS member switch role = VSS Active, id = 2
Fast-hello dual-active detection enabled: Yes
Fast-hello dual-active interfaces:
Port
---------------------------------------------------
Gi2/2/11
Executing the command on VSS member switch role = VSS Standby, id = 1
Fast-hello dual-active detection enabled: Yes
Fast-hello dual-active interfaces:
Port
---------------------------------------------------
Gi1/1/5
This example shows how to display the status of packet exchanges between the individual fast-hello
links:
Switch# show switch virtual dual-active fast-hello counters
Executing the command on VSS member switch role = VSS Active, id = 2
Dual-active fast-hello link counters:
Port
--------------------------------------
Gi2/2/11
Executing the command on VSS member switch role = VSS Standby, id = 1
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)SG
5-54
Dual-Active Partner
Detect Capable Name
Yes g9-68
Yes g9-68
Local State
Dual Active Capable
Local State
Dual Active Capable
Tx
OK
762 759
Chapter 5
Partner
Port
Gi1/11
Gi1/12
Peer Port
Gi1/1/5
Peer Port
Gi2/2/11
Rx
OK
Configuring Virtual Switching Systems
Partner
Version
1.1
1.1
OL-30933-01