Displaying Vrf-Lite Status - Cisco Catalyst 4500 series Administration Manual

Chapter 41 Configuring VRF-lite
end
interface GigabitEthernet 1/0/2
switchport access vlan 200
end
interface GigabitEthernet 1/0/24
switchport trunk encapsulation dot1q
switchport mode trunk
end
router ospfv3 100
router-id 40.40.40.40
!
address-family ipv6 unicast vrf v1
redistribute connected
area 0 normal
exit-address-family
!
router ospfv3 200
router-id 50.50.50.50
!
address-family ipv6 unicast vrf v2
redistribute connected
area 0 normal
exit-address-family
!

Displaying VRF-lite Status

To display information about VRF-lite configuration and status, perform one of the following tasks:
For more information about the information in the displays, refer to the Cisco IOS Switching Services
Note
Command Reference at:
http://www.cisco.com/en/US/docs/ios/ipswitch/command/reference/isw_book.html
OL_28731-01
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
Configuring VRF-lite for IPv6
41-21