Signaling (14) - Cisco BTS 10200 Troubleshooting Manual

Chapter 10 Signaling Troubleshooting

SIGNALING (14)

To troubleshoot and correct the cause of the alarm, refer to the
(14)" section on page
DESCRIPTION Link is Remotely Inhibited
SEVERITY MINOR
THRESHOLD 100
THROTTLE 0
DATAWORDS Link–ONE_BYTE
Link Name–STRING [8]
PRIMARY Issued when the specified Signaling System 7 (SS7) link is inhibited at the remote end.
CAUSE
PRIMARY Monitor the events at the network level for any related to the specified SS7 link. Restorative actions
ACTION need to be taken on the remote end.
SIGNALING (15)
To troubleshoot and correct the cause of the alarm, refer to the
(15)" section on page
DESCRIPTION Link is Locally Inhibited
SEVERITY MINOR
THRESHOLD 100
THROTTLE 0
DATAWORDS Link No–ONE_BYTE
Link Name–STRING [8]
PRIMARY Issued when the specified SS7 link is inhibited at the local end.
CAUSE
PRIMARY Verify that the SS7 signaling adapter process is running and that the SS7 interface card(s) are in
ACTION service.
SECONDARY If a component is found to be non-operational, restore it to service.
ACTION
OL-8723-19
10-133.
10-133.
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
Signaling Events and Alarms
"Link is Remotely Inhibited—Signaling
"Link is Locally Inhibited—Signaling
10-9