Status Update Process Request Failed—Maintenance (87) - Cisco BTS 10200 Troubleshooting Manual

Monitoring Maintenance Events
Status Update Process Request Failed—Maintenance (87)
The Status Update Process Request Failed alarm (major) indicates that the status update process request
failed. To troubleshoot and correct the cause of the Status Update Process Request Failed alarm, refer to
the
Status Update Process Database List Retrieval Error—Maintenance (88)
The Status Update Process Database List Retrieval Error alarm (major) indicates that the status update
process DB had a retrieval error. To troubleshoot and correct the cause of the Status Update Process
Database List Retrieval Error alarm, refer to the
Error—Maintenance (88)" section on page
Status Update Process Database Update Error—Maintenance (89)
The Status Update Process Database Update Error alarm (major) indicates that the status update process
DB had an update error. To troubleshoot and correct the cause of the Status Update Process Database
Update Error alarm, refer to the
section on page
Disk Partition Moderately Consumed—Maintenance (90)
The Disk Partition Moderately Consumed alarm (minor) indicates that the disk partition is moderately
consumed. To troubleshoot and correct the cause of the Disk Partition Moderately Consumed alarm,
refer to the
Internet Protocol Manager Configuration File Error—Maintenance (91)
The Internet Protocol Manager Configuration File Error alarm (critical) indicates that IPM configuration
file has an error. To troubleshoot and correct the cause of the Internet Protocol Manager Configuration
File Error alarm, refer to the
section on page
Internet Protocol Manager Initialization Error—Maintenance (92)
The Internet Protocol Manager Initialization Error alarm (major) indicates that the IPM process failed
to initialize correctly. To troubleshoot and correct the cause of the Internet Protocol Manager
Initialization Error alarm, refer to the
(92)" section on page
Internet Protocol Manager Interface Failure—Maintenance (93)
The Internet Protocol Manager Interface Failure alarm (major) indicates that an IPM interface has failed.
To troubleshoot and correct the cause of the Internet Protocol Manager Interface Failure alarm, refer to
"Internet Protocol Manager Interface Failure—Maintenance (93)" section on page
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
7-84
"Status Update Process Request Failed—Maintenance (87)" section on page
7-107.
"Disk Partition Moderately Consumed—Maintenance (90)" section on page
"Internet Protocol Manager Configuration File Error—Maintenance (91)"
7-107.
7-107.
"Status Update Process Database List Retrieval
7-107.
"Status Update Process Database Update Error—Maintenance (89)"
"Internet Protocol Manager Initialization Error—Maintenance
Chapter 7 Maintenance Troubleshooting
7-107.
7-107.
7-108.
OL-8723-19