Signaling (125) - Cisco BTS 10200 Troubleshooting Manual

Signaling Events and Alarms

SIGNALING (125)

To troubleshoot and correct the cause of the alarm, refer to the
Routing Error—Signaling (125)" section on page
DESCRIPTION Signaling Connection Control Part Routing Error (SCCP Routing Error)
SEVERITY MAJOR
THRESHOLD 100
THROTTLE 0
PRIMARY The signaling connection control part (SCCP) route is invalid or is not available.
CAUSE
PRIMARY Provision the right SCCP route.
ACTION
SIGNALING (126)
To troubleshoot and correct the cause of the alarm, refer to the
Binding Failure—Signaling (126)" section on page
DESCRIPTION Signaling Connection Control Part Binding Failure (SCCP Binding Failure)
SEVERITY MAJOR
THRESHOLD 100
THROTTLE 0
DATAWORDS Local Point Code–STRING [20]
Local Subsystem Numb–ONE_BYTE
PRIMARY A Trillium stack binding failure has occurred.
CAUSE
PRIMARY Re-initialize the TCAP signaling adapter (TSA) process or remove the subsystem from the Element
ACTION Management System (EMS) table and add it again.
SIGNALING (127)
To troubleshoot and correct the cause of the alarm, refer to the
Part Binding Failure—Signaling (127)" section on page
DESCRIPTION Transaction Capabilities Application Part Binding Failure (TCAP Binding Failure)
SEVERITY MAJOR
THRESHOLD 100
THROTTLE 0
PRIMARY A Trillium stack binding failure has occurred.
CAUSE
PRIMARY Re-initialize the TSA process or remove the subsystem from the EMS table and add it again.
ACTION
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
10-68
Chapter 10
"Signaling Connection Control Part
10-154.
"Signaling Connection Control Part
10-155.
"Transaction Capabilities Application
10-155.
Signaling Troubleshooting
OL-8723-19