Translation Verification Tool - Cisco BTS 10200 Troubleshooting Manual

Chapter 15 Diagnostic Tests

Translation Verification Tool

This section describes the TVT and includes the following sections:
•
•
•
•
Overview
The TVT is a diagnostic tool that simulates a call from the originator to a specific destination based on
dialed digits. It enables a user to check system translations and determine if routing will occur as
expected without making a call.
Command Format
The TVT command uses the following format:
translate <line|trunk>; parameter=value;
Examples translate line calling-dn=2189722345; called-dn=8002550005
Syntax Description * Calling-DN
Called-DN
Examples
translate trunk tgn-id= 1; called-dn=7034321234;
Syntax Description * Called-DN
* Tgn-ID
GAP
OL-8723-19
Overview, page 15-27
Command Format, page 15-27
Response Format, page 15-28
Translation Verification Tool Measurements, page 15-29
The caller's directory number. VARCHAR(10): 10 digits in the format
npaxxxxxxx.
Query Verification Tool and Translation Verification Tool
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
15-27