Headset Connection; Disable Headset; Wireless Headset - Cisco 7975G Installation Manual

Unified ip phones

Hide thumbs Also See for 7975G:

Table of Contents

Cisco Unified IP Phones Installation

The Cisco Unified IP Phone 7971G-GE and 7970G do not support wireless headsets.

Note

Headset Connection

To connect a headset to the Cisco Unified IP Phone, plug it into the Headset port on the back of the phone.

Press the Headset button on the phone to place and answer calls by using the headset.

You can use the headset with all Cisco Unified IP Phone features, including the Volume and Mute buttons.

Use these buttons to adjust the ear piece volume and to mute the speech path from the headset microphone.

The wireless headset remote hookswitch control feature allows you to use a wireless headset with the Cisco

Unified IP Phone. See the wireless headset documentation for information about connecting the headset and

using the features.

You can disable the headset by using Cisco Unified Communications Manager Administration.

To disable the headset, perform the following steps:

Procedure

Step 1

Choose Device > Phone and locate the phone you want to modify.

Step 2

In the Phone Configuration window, check the Disable Speakerphone and Headset check box.

Step 3

Click Apply.

Note

The Cisco Unified IP Phones 7971G-GE and 7970G do not support wireless headsets.

By default, the Wireless Headset Hookswitch Control option is disabled. You can enable the option in the

Cisco Unified Communications Manager Administration application.

See the wireless headset documentation for information about connecting the headset and using the features.

Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified

Communications Manager 9.0 (SCCP and SIP)

Headset

Table of Contents

7971g-ge 7970g 7965g 7945g