Cisco Catalyst 4500 Series Configuration Manual page 478

VLAN Membership Policy Server
Figure 15-4
End
station 1
Secondary VMPS
End
station 2
Secondary VMPS
Two topologies are possible.
a Catalyst 4500 series switch operating as a VMPS client.
station attached to a Cisco IP Phone, which is attached to a Catalyst 4500 series switch.
Figure 15-5
Endstation
(in VLAN 10)
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
15-30
Dynamic Port VLAN Membership Configuration
Catalyst 4000
(CatOS)
Primary VMPS
Server 1
Switch 1
3/1
Switch 2
Catalyst 6000
(CatOS)
Server 2
Switch 3
Switch 4
Switch 5
Switch 6
Switch 7
Switch 8
Switch 9
URT
Server 3 Switch 10
Figure 15-5
Topology with an End Station Attached Directly to a Catalyst 4500 Series Switch
Operating as a VMPS Client
Catalyst 4500 (IOS)
(VMPS client)
172.20.26.150
Client
172.20.26.151
172.20.26.152
172.20.26.153
172.20.26.154
172.20.26.155
172.20.26.156
172.20.26.157
Client
172.20.26.158
172.20.26.159
illustrates a topology with one end station attached directly to
Figure 15-6
Internet
Catalyst 4500 (CatOS)/
Catalyst 6500 (CatOS)/
URT
(VMPS server)
Chapter 15 Configuring VLANs, VTP, and VMPS
TFTP server
Router
172.20.22.7
illustrates a topology with an end
OL-25340-01