Displaying Vtp Devices In A Domain - Cisco Catalyst 4500 Series Configuration Manual

VLAN Membership Policy Server
Request advertisements transmitted : 3
Number of config revision errors
Number of config digest errors
Number of V1 summary errors
VTP pruning statistics:
Trunk
---------------- ---------------- ---------------- ---------------------------
Fa5/8

Displaying VTP Devices in a Domain

To display information for all the VTP devices in a domain, perform this task:
Command
Switch# show vtp devices [conflicts]
This example shows how to display information for VTP devices in a domain:
Switch# show vtp devices
Retrieving information from the VTP domain, please wait for 5 seconds.
VTP Feature Conf Revision Primary Server Device ID
----------- ---- -------- ------------------------------
VLAN
VLAN
MST
Switch#
VLAN Membership Policy Server
This section describes how to configure dynamic port VLAN membership through the VLAN
Membership Policy Server (VMPS), and includes the following subsections:
•
•
•
•
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
15-20
Join Transmitted Join Received
43071
No 18 0016.9c6d.5300 0012.011a.0d00
No 18 0016.9c6d.5300 0012.4371.9ec0
Yes 4 0012.4371.9ec0=0012.4371.9ec0
About VMPS, page 15-21
Overview of VMPS Clients, page 15-23
Dynamic Port VLAN Membership Configuration Example, page 15-29
VMPS Database Configuration File Example, page 15-32
Chapter 15
: 0
: 0
: 0
Summary advts received from
non-pruning-capable device
42766 5
Purpose
Gathers and displays information for all the VTP devices
in the domain.
No information is gathered or displayed from
Note
switches set to vtp modes off or to transparent
for a particular feature.
The conflicts keyword (optional) displays the
information of devices that have conflicting primary
servers.
Configuring VLANs, VTP, and VMPS
Device Description
------------------
R2
R1
R1
OL-25340-01