Connectors - NEC Univerge SV9100 Hardware Manual

Issue 1.2
Table 4-14 GCD-8DLCA/GCD-16DLCA LED Indications (Continued)
LED Indication
Live LED Busy LED
(Green) (Red)
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash (100ms
On/Off)
4 - 34
Operation Status
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
4.1.4

Connectors

The CNx01 connectors provide connection to four digital station
ports. With the GCD-16DLCA blade, the CN101, CN201, CN301,
and CN401 connectors are available. With the GCD-8DLCA blade
the CN301 and CN401connectors are removed from the blade.
Any cabling to the DLCA blade must be within the
building - no outside cabling is permitted.
Table 4-15 GCD-8DLCA/GCD-16DLCA/ RJ-61 Cable Connector
Pin-Outs on page 4-35
Refer to Figure 4-9 GCD-8DLCA/GCD-16DLCA/ Blade on page 4-32
for the location of the connectors on the ESIU blades.
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
show the pin-outs for the RJ-61 connector.
Installing the SV9100 Blades
UNIVERGE SV9100
Remarks