Led Indications - NEC Univerge SV9100 Hardware Manual

UNIVERGE SV9100
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash (100ms
On/Off)
System Hardware Manual
4.5.3

LED Indications

LED indications for the GCD-LTA are indicated in
GCD-LTA LED
function and LED and Operational status. Refer to
GCD-LTA Blade on page 4-49
blade.
Table 4-24 GCD-LTA LED Indications
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
Indications. Each LED is listed with its associated
for the location of the LEDs on the
Issue 1.2
Table 4-24
Figure 4-13
Remarks
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
4 - 51