NEC Univerge SV9100 Hardware Manual page 81

UNIVERGE SV9100
System Hardware Manual
Do not remove or install this blade with the power
on.
1. Ensure the chassis is powered down.
2. Locate the door positioned on the left end (expansion bay) of
the Expansion Chassis.
Figure 3-14 GPZ-BS11 Expansion Bay in Expansion Chassis
3. From the left side of the chassis, pull cover outward to
expose the expansion bay (refer to
Expansion Chassis Cover on page
Figure 3-15 Open Expansion Chassis Cover
4. Pull the cover toward you to remove.
Cover must be removed to install GPZ-BS11 blade.
è
Issue 1.2
Expansion Bay
Figure 3-15 Open
3-9).
3 - 9