NEC Univerge SV9100 Hardware Manual page 373

UNIVERGE SV9100
System Hardware Manual
17. Push the latch to release the cover (see
the Bottom Unit
cable and close the cover.
Figure 5-127 Stowing the Bottom Unit Cable
18. Cut or trim the supplied coupled device for the tilt legs handset
option.
19. Insert the stopper coupled device into the right and left tilt legs
(see Figure 5-128 Insert Stopper for Handset
Figure 5-128 Insert Stopper for Handset Use
20. Set the coupled device for tilt legs into position.
Cable). Stow the extra bottom unit connecting
Issue 1.2
Figure 5-127 Stowing
Use).
5 - 113