Power Requirements; Power Supply Specifications - NEC Univerge SV9100 Hardware Manual

Issue 1.2
ADA-L UNIT
APR-L UNIT
PSA-L (BK) UNIT
LCA
OPX
.
5.2
2 - 20
Table 2-16 Cable Connection Between the Analog Port and the Single Line Equipment
Connected Equipment
Mixing digital and analog ports through the same 25-pair cable runs is not
recommended.
Connected Equipment
Music on Hold and Background Music Sources
External Amplifier
ITL Cabling
Between DX4NA Door Phone and PGDAD

Power Requirements

A dedicated
100VAC/120VAC/220VAC/230-240VAC 50HZ/60HZ
within seven feet of the chassis is required. A separate dedicated outlet for
each chassis should be installed.
Double Pole/Neutral Fusing
(power supply fuses are located at both the L and N side).
5.2.1

Power Supply Specifications

Maximum Feet from Connected
Cable
Equipment to Telephone
Twisted Pair
Twisted Pair
Twisted Pair
600ohms (including the SLT)
3,281 ft (1,000m) with 26 AWG
Twisted Pair
4,920 ft (1,500m) with 24 AWG
8,202 ft (2,500m) with 22 AWG
1,500ohms or less (including the SLT)
13,123 ft (4,000m) with 26 AWG
Twisted Pair
20,997 ft (6,400m) with 24 AWG
14,777 ft (10,600m) with 22 AWG
Table 2-17 Cabling Requirements
UNIVERGE SV9100
9.5 ft (2.89m)
50 ft (15.24m)
1,700 ohms
Cable
Hi-Fi Shielded Audio Cable
Hi-Fi Shielded Audio Cable
Cat 5 Straight Data Network
Cable – 328.1 ft (100m)
maximum distance.
0.4mm cable = 70m (approx.)
0.5mm cable = 110m (approx.)
circuit located
SV9100 System Specifications