NEC Univerge SV9100 Hardware Manual page 102

Issue 1.2
3 - 30
2. Align holes E and F on the MV bracket (upper) with holes on the 9.5
inch Basic Chassis (CHS2UG). Install 2 M4 x 14 screws.
M4 x 14 screws are provided with the WALL MOUNT BRACKET.
Figure 3-38 Install Upper Bracket
3. Align holes G and H on the MV bracket (lower) with holes on the 9.5
inch Basic Chassis (CHS2UG). Install 2 M4 x 14 screws.
M4 x 14 screws are provided with the WALL MOUNT BRACKET.
Figure 3-39 Install Lower Bracket (Option 2)
UNIVERGE SV9100
Installing the SV9100 Chassis