Installing The 8Lkd (Ld)-L Unit - NEC Univerge SV9100 Hardware Manual

UNIVERGE SV9100
System Hardware Manual
Figure 5-76 8LKD (LD)-L UNIT
5.2.2.1

Installing the 8LKD (LD)-L UNIT

1. Turn multiline terminal upside down.
.
2. Pry the side panel from the multiline terminal.
Figure 5-77 Remove Side Panel from Multiline Terminal
To prevent possible damage to the 8LKD
(LD)-L UNIT or the DTL multiline
terminal during installation or removal,
disconnect the line cord/LAN cable and
the AC/DC adapter from the DTL
multiline terminal.
Only one 8LKD (LD)-L UNIT can be attached to the
DTL multiline terminal.
Side Panel
Issue 1.2
Screw
5 - 79