Issue 1.2
4.2
3 - 46
Figure 3-58 Install Additional Brackets from CHS2UG JOINT BRACKET KIT
4.
Using supplied screws, secure the CHS2UG STAND KIT (K) to the
floor.
5.
Connect the ground wire to all chassis. Refer to
Grounding on 19" Chassis on page 3-13
grounding the system.
6.
Refer to
continue installation of the chassis or, Chapter 6 paragraph
Installation and Safety Precautions on page 4-3
blades.
Stand Mounting the 9.5" CHS2UG B Chassis
To prevent possible damage to the 19" chassis due to
falling, NEC recommends screws be installed in the
stand mount brackets as soon as possible.
1.1.5 Install AC Power Cords on 19" Chassis on page 3-15
UNIVERGE SV9100
Metal
Brackets
1.1.3 Install
for complete details on
2.1
for installation of
Installing the SV9100 Chassis
to