NEC Univerge SV9100 Hardware Manual page 124

Issue 1.2
3 - 52
securing it in place. Note that the cabling is run through the front of the rack
for ease of access.
5. Secure the brackets to the rack using the screws supplied.
Repeat for additional chassis mounting.
Figure 3-67 Rack Mount 19" CHS2UG
Single CHS2UG Rack Mount
6. Connect the ground wire to all chassis. Refer to
19" Chassis on page 3-13
Each CHS2UG chassis will require approximately 3.5" of height
within the rack.
for complete details on grounding the system.
UNIVERGE SV9100
Single CHS2UG Rack Mount with
Three Expansion Chassis
1.1.3 Install Grounding on
Installing the SV9100 Chassis